Chen Shen could only sigh and smiled bitterly. The situation on Taishan Knife had a big blow to him.

He has worked in this industry for more than ten years and has worked in Sante Knife for several years. He has always believed that Sante Knife is the best in the world.

What happened next to him greatly subverted his perception and he was not feeling well.

"Did you see the test of the Taishan Knife next to you?"

"I saw it, I really don't understand what they were doing."

He felt even more bitter when he heard that his colleagues didn't know what was going on.

Chen Shen sighed again, "That's them cheering and celebrating. Their set of knives, which uses 3,000 rpm, has processed more than a dozen parts in one breath. The knives have no wear at all, and the parts processed are completely qualified and have a very beautiful appearance."

What!

This is impossible!

The Santes were all dull and it took them a long time to come back to their senses. Their first reaction when they came back to their senses was that they didn't believe it.

How could there be such alloy cutters in the world? If there is really, it will be born in Sante, not Taishan Tool Group.

The two foreigners from Sante looked at each other quietly, then nodded gently, quietly arrived at the side of Taishan Knife, stretched their necks and pricked their ears.

There was another burst of cheers in the crowd, and another part was beautifully processed.

"This is the first one."

"It's already the 21st piece, and the tool has not worn at all. It seems that there is no problem in processing 21 pieces."

"Oh my God, today I'm going to have a swelling posture. This is the first time I've seen dozens of parts in one go."

"The key is that these are all high-temperature alloy parts, typical difficult-to-process materials. The people next to them are testing the knife. I heard that they can only process four parts with a set of tools, and then they have to take the tool down to repair or replace the alloy blade."

"It's like a dream. When did our domestic alloy knives be so awesome?"

The scene was lively, and more and more people came to watch the fun, almost three floors inside and three floors outside.

The two foreigners in Sante's faces gradually became darker, knowing that this time the knife test was completely slapped in the face.

The two of them were completely dissatisfied and returned to their side in shame. When they told them about the situation, all of Sante's people were hit hard.

I don't play like this at all!

A set of alloy cutters process dozens of parts at once, but that's a big deal, it's not comparable at all.

I've escaped, I can only escape.

The Santes packed up their things and left in shame.

In the afternoon.

There are 45 parts in this batch. This CNC drilling and milling process may have taken two or three days, but it was completed in half a day.

"Tsk tsk, this is so amazing. There is still no obvious wear in this set of knives."

"It's awesome, today I'm an eye-opener."

“….”

The workers and technicians watching the side were discussing each other, and they all admired each other and almost knelt down directly. The set of knives from Taishan Group are so awesome.

All parts were processed and all the inspections were passed. The set of alloy tools were finally removed and the tool magnification was carried out on the tool meter.

When magnifying 30 times, it only shows a little wear. When magnifying 50 times, it can be seen a little clearer.

Feng Xuesong was extremely satisfied and laughed. "Mr. Han, the tool wear is very small, and there is no need to grind it at all. There is no problem in processing 2 or 30 parts.

At this time, Han Guang was in a very good mood.

My heart was also full of gratitude. The black alloy bull that Brother Yong gave me gave me such a big surprise.

He keenly realized that with this black alloy, there will be basically no foreign tool vendors in the future mid- and high-end alloy tool market.

The drilling and milling process test tool was completed, and this set of alloy tools performed perfectly, bringing everyone a huge surprise.

In addition to drill bits and milling cutters, Han Guang also brought several alloy blades.

Han Guangdao, "Master Feng, let's try counting the alloy blades next, how about it."

"Okay!" Feng Xuesong agreed happily. Seeing the boxes of counting blades that Han Guang took out were all black and shiny, he was excited and looked forward to it.

How good is this blade performance? How many parts can one blade carry?

Arrange now!

Feng Xuesong said loudly, "Where is Gong Fan, where have you gone?"

Many people looked around and searched.

There is a technician who said, "Mr. Fan has left long ago and he is not here."

Feng Xuesong said slightly dissatisfied, "Why are you missing at this time when you play the piano randomly?"

Fan Gaoyi didn't have the face to stay here. When he got more than a dozen parts, he quietly slipped away.

He knew that he was slapped in the face today.

The imported alloy knives he highly praised are completely defeated, and they are simply incredible.

He left in shame while others were not paying attention.

Feng Xuesong personally called another senior technician and gave some advice, and then the test knife of the CNC turning process began.

The same is a high-temperature alloy material. This material has poor turning performance, especially the wear of the tool. If one alloy turning tool cannot be turned two, the alloy blade needs to be replaced for three parts.

The workers of this CNC lathe are preparing, such as installing the black and shiny alloy blades of the Taishan Group, installing the parts to be processed onto the workbench, etc.

Han Guang, Feng Xuesong and others were looking at the CNC machining program. After watching for a while, Han Guangdao said, "Director Feng, I think the parameters of the CNC machining program need to be changed."

Feng Xuesong deeply agrees.

Therefore, the original processing speed was changed to 200 rpm, the rough-car depth was 0.8 mm to 2 mm, and the precision-car depth was 0.3 mm to 0.5 mm...

After the parameters are modified, the machine tool starts and turning begins.

Similarly, there are many people around this CNC machine tool, including workers, technicians, and some management personnel such as team leaders.

"Wow, the turning speed is so fast!"

"Did you see that? At such a fast speed, the lathe didn't shake at all and the sound was very small."

"This is the real silence of moistening things."

"I'm so looking forward to it!"

Originally, it took about 55 minutes to turn a part in the process, and it was only 12 minutes before turning.

As soon as the machine tool protective door was opened, the first thing everyone saw was a very beautiful part, with a bright surface like a mirror.

Experienced people know that the surface of the part is so bright, which means that the alloy tool used to process it is very sharp.

Niuzi!

Eye-opening!

The surroundings became lively, and everyone commented on it, almost all of them were admired.

Check parts and pass!

Check the tool, without any wear, it still looks brand new!

The second part, the third part, the fourth part...

It was processed until the evening. There were 42 parts in total, all of which were completed. The alloy turning tools had not yet reached the point where they needed to replace the alloy blades.

If this is put before, who would believe it?

The next day, in the afternoon.

Han Guang was holding a thick knife test report in his hand and carrying a few samples of alloy knives. He excitedly arrived at Global Building.

.....
Chapter completed!