Chapter 432 This is not scientific
But, the arm can't twist the thigh.
Feng Xuesong is the workshop director and the top leader of the workshop. Although Fan Gaoyi is a senior technician, he still dares not do anything, so he can only arrange the test knife honestly.
The knife test has begun.
Seeing the knives brought by Han Guang and the others, whether they were drill bits or milling cutter blades, were all black and shiny, he was slightly surprised.
But I was just a little surprised and didn't ask much, guessing that this might be a new product of Taishan Alloy Tools Group.
He thought to himself, so what about the new product? It must be comparable to Sante's knives.
After some preparation, the test knife began.
The parts processed are the same as those processed by the CNC center next to them.
The parts are the same, the same model of the two CNC machine tools are used.
Be ready, test the knife to start!
When this CNC machining center works, everyone calms down. After about 20 or 30 minutes, the first part is processed.
The CNC machining center stopped and the workers operating the machining center immediately conducted an inspection.
First, look at each tool, whether it is a drill bit or a milling cutter, and you can see that there is no problem. Then you will measure the workpiece with a measuring tool, and then sing loudly.
"Director Feng, Mr. Fan, there is no problem with the tool and the parts are processed for qualified parts."
What!
Is there no problem at all?
Mr. Fan looked at it carefully and saw that there was really no problem. He couldn't help but look puzzled and looked suspiciously at Han Guangdu and others. His eyes seemed to say, this is impossible.
However, just the processing of the first part may not explain anything. Fan Gaoyi didn't say anything, but he was just a little suspicious.
Feng Xuesong is an expert in the field of processing. He was previously the workshop technical director and has profound attainments in mechanical processing technology.
He also looked at the processed parts himself, looked at the cutters, and nodded gently.
He picked up the processed iron filings and looked at them. He thoughtfully and nodded gently.
An experienced technician can often see some clues from the processed iron filings.
Continue processing.
The worker installed the second part, completed the knife setting, and Han Guang stopped him when he was about to process it.
"Director Feng, I looked at the processing parameters. The speed was low and the drilling and milling speed was only 500 rpm. I suggest increasing it to 1500 rpm or higher.
What!
Fan Gaoyi was about to express his objection and was about to say loudly, do you understand mechanical processing? This is a high-temperature alloy, a typical difficult-to-process material, with a speed of 1500 rpm, what is that concept!
But before he could say it, Feng Xuesong raised his hand to interrupt.
Feng Xuesong said, "Mr. Han, you are so confident in your knives and really use a speed of 1500 rpm."
"I think I can give it a try. I think there is no problem with the speed of 1500 rpm." Han Guang seemed very confident.
Feng Xuesong just hesitated for a moment, then nodded and said, "Okay, the speed will increase to 1500 rpm, let's give it a try."
Fan Gaoyi: "..."
He still didn't say anything because he was interrupted by Feng Xuesong. Just now, Feng Xuesong looked at the condition of the tool and the iron filings, and thought that it would be OK to try the speed of 1500 rpm.
The machining CNC program is immediately modified, and the drilling and milling speeds have been increased to 1,500 rpm.
Press the start button and the processing begins again!
This time the processing speed was much faster. It took more than twenty minutes to process the first part, and this time it only took seven or eight minutes, and the time was only about one-third of the first part.
Processing is complete!
The machining center stopped, the protective door opened, and everyone came over and looked carefully.
"Huh!"
Feng Xuesong was slightly surprised, "Mr. Han, there is no change in your knives, and there is no sign of wear."
Two parts were processed continuously, and they were typical difficult-to-process materials, and also used a speed of 1500 rpm. Generally, the tool should change.
Han Guang also looked at the condition of the tool and the processed parts.
There is really no change in these tools, and there is no trace of wear.
Suddenly, he was shocked and his experience told him that this batch of knives made of black alloys was extraordinary.
After his confidence increased greatly, Han Guang suggested, "Director Feng, the processing speed will increase by 3,000 rpm."
Feng Xuesong said, "Yes, let's try the processing speed of 3,000 revolutions."
After some preparation, the third part processing began.
The processing speed of 3000 revolutions was only three or four minutes before the parts were processed in just three or four minutes.
"Oh my god!"
"You can take a look and the parts that are processed are still very beautiful. It is unbelievable that this set of tools has no wear or tear at all."
"It's amazing. This set of knives really doesn't show any wear."
“……”
The whole scene was excited, and everyone looked full of energy. Only Fan Gaoyi didn’t speak, had a calm face, and only had one thought in his heart. This is unscientific!
The fourth part, the sixth part, the seventh part...
The processing speed of 3000 revolutions is simply improved by several times. A part is processed every three or four minutes.
Every time a part is processed, there is a cheer next to the machining center, and more and more people are watching. Some workers and technicians come over after hearing the news.
Such a big noise soon attracted the idea of people from Sante Company not far away.
They were confused!
What's going on?
Just a try, why is the movement on Taishan Knife so much? It seems like it has been stimulant. One of Sante's techniques came over quietly.
After watching for a few minutes, he looked shocked and said in his heart that this was not true.
Damn it, one part is processed in three or four minutes. The key is that the set of tools provided by Taishan Group has processed more than a dozen parts without grinding and no wear or any amount of wear.
This is unscientific!
Oh my God, how could there be such alloy cutters in the world? This is really unscientific!
After a long time of silence, he came back to their machining center in a depressed mood, with a little bitterness on his face.
At this time, one of their parts was completed, and it took more than twenty minutes for the same part.
Knowing that a part was processed in three or four minutes from Taishan Group, he shook his head helplessly.
Santer's tool has obvious wear and has finished processing the fourth part. All tools need to be taken down for grinding or replacement of alloy blades.
"Old Chen, what's wrong with you?"
Someone noticed his expression, and some asked in confusion.
………
Chapter completed!