In the next two days, Xiao Feng was unable to leave the guesthouse at all, and even He Xiaojun was unable to be let go.

Because the emergence of this industrial robot is really important to the military.

With such equipment, many equipment that could only be thought about in the past can finally be produced by themselves.

So there are inevitably many problems for everyone. The three aspects of sea, land, air and other aspects can be said to be taking turns to take turns.

Xiao Feng was also scared. Finally, when he woke up at noon the next day, he simply called him back to Xinghuo Factory.

Let the engineers there quickly build a machine tool and come to the XXX Research Institute in Beijing.

With a machine tool, it is always much better than drying strokes with them.

Moreover, with the machine tool, the military can actually experience the awesomeness of this machine tool.

After all, no matter how small flowers you said before, they were just skeptical, but they didn’t see the magic of your machine tool with their own eyes.

But with the machine tool, it's different.

This industrial intelligent robot can be seen in real terms when it is put into this place.

This will bring better results.

And Xinghuo Technology naturally attaches great importance to Mr. Xiao’s requirements.

That night, their CTO, Mr. Hu, took Xiao Feng's private plane and came to the capital with a robot.

The military even kept working hard and directly pulled down the XXX office in the capital, including people and equipment.

With the help of several cloning experts, Mr. Hu assembled the parts of several large boxes in front of everyone.

To be honest, when the military first saw this machine tool, in addition to being shocked, the second feeling was that this thing was very unreliable.

Why do you feel this way?

Take this XXX Institute as an example. This unit is a research institute directly under the General Equipment Department, which specializes in developing special equipment for the Army.

The history is definitely very long, and it is also a very high-level research institute in the General Equipment Department.

Not to mention the scientific researchers inside, any one of them is a doctor, let alone the equipment inside.

It can be said that there are the most rare equipment under the name of the General Assembly, and it can also be said to be one of the top research institutes in China at present.

For example, there is one of the five-axis linkage machine tools that were brought from JK back then.

Therefore, the scientific researchers here are all knowledgeable.

Just looking at Mr. Hu, the CTO of Xinghuo Technology, and just assembled a "machine tool" with a few people, everyone felt a little unbelievable.

Especially no matter how you look at this machine tool, it is a world of difference from the traditional five-axis linkage machine tool.

Traditional five-axis linkage machine tools are also divided into several types, such as horizontal and vertical.

Traditional machine tools also have several main components, such as benches, fixtures, and tool library.

Then today's machine tools are basically sealed.

To put it bluntly, when working, a cover will be added to the periphery.

The operator can see the processing conditions inside the cover through the camera.

This is mainly done to prevent iron filings from flying around during processing and polluting the environment.

Because the entire workshop has very high requirements for environmental self-cleaning.

Moreover, the processing workshop of this kind of machine tool is also specially customized.

Not only does it require the use of dust removal equipment, but it also requires very high ground.

Especially the foundation requirements of foundations are completely different from those of ordinary buildings.

The only requirement for the foundation of ordinary buildings is to be strong and earthquake-resistant.

The foundation of this kind of processing workshop requires toughness, able to absorb vibrations caused by the machine tool during operation, reduce feedback reaction forces, and ensure the accuracy of the machine tool processing.

Therefore, river sand is usually laid under such workshops to reduce the impact of machine tools on the ground.

So in everyone's impression, high-precision five-axis linkage machine tools are a very difficult equipment to handle.

Sometimes even after you move, it is not very easy to reassemble it.

Because the accuracy of your assembly will also affect the accuracy of machine tool processing.

This is why, we have hated companies even if they purchased machine tools from Germany.

But after the machine tool is sent from Germany, we must also invite special engineers from Germany to assemble.

Because I left other people's engineers, the accuracy of the machine tools you installed was not good.

Moreover, assembling a machine tool can be said to be quite time-consuming and labor-intensive.

For example, the top industrial machine tools at present are actually ASMA's lithography machines.

And their top lithography machines are produced and shipped to Wanwan or after the Southern Dynasty.

It must be assembled by Asmay's own engineer. If one is installed, a team of thirty people will work together.

It will take eight months to a year for each team to install a machine tool.

During this year, they had to carefully assemble each component and then continuously debug it.

Otherwise, do you think 5nm chips can be produced so easily?

Even now, although there are already a large number of 5nm chips on the market, the 5nm chips that have been launched have problems of one kind or another.

For example, Sansang's 5nm chip has problems such as high heat loss and easy to get stuck.

Qualcomm's 5nm chip has high power consumption and poor performance.

At present, only H's 5nm chip is quite good, but it also faces problems such as serious shortage of yield rates during production.

The main reason for these problems is that the installation and debugging of 5NM lithography machines has not yet reached the perfect level.

So if you want a machine tool, it is not just a matter of design or production.

Another very important feature is installation and debugging, and the other is to ensure that it can work in an absolutely suitable environment.

And the engineers of Xinghuo Technology in front of us are like splicing blocks.

He took out some parts from the cardboard box in a big way, and in front of everyone, he took various pliers and wrenches and started assembled.

Judging from their actions, it was more like assembling a rough Lego toy, and it wasn't like assembling a high-precision processing machine tool.

When this machine tool was assembled, everyone was stunned. This was a completely different thing from the traditional machine tool they remembered.

To put it bluntly, a traditional machine tool is a large operating table with several boxes on the operating table, which are equipped with ball screws for driving motors and control fixtures.

Another thing is a tool box for knives.

And this ‘machine tool’ is very different from the previous ones in terms of structure.

There is also an operating table below, but three robotic arms with various joints grow out from the edge of the operating table.

In front of the robot arm, there is a joint structure that is very similar to that of the human hand.

Soon, Mr. Hu of Xinghuo Technology began to debug this machine tool.

The machine tool was placed so big on the self-leveling ground in the laboratory, and Mr. Hu stood aside with a flat plate.

He pressed it on the tablet a few times, and then the machine tool was activated after powering on.

I don’t know what program he entered on the computer, and then a jaw-dropping scene appeared.

Those robotic arms actually started to move rhythmically.

The front, back, left, left, up, down, and down, then the 360 ​​joint rotates, and the front part similar to human fingers began to clench the fist and then release it, and began to move...

Although the process of processing some workpieces has not started yet, the series of actions of this industrial robot have already stunned everyone on the scene.

Because everyone present is an elite in the industry, he is well-informed.

But such flexible mechanical joints can also perform such complex movements at the same time.

Even every robotic arm and every finger are walking and doing completely different movements.

This alone shocked the audience.

This is too terrifying. Not to mention how high the hardware requirements are, it is unimaginable that industrial software that can control this device and complete such complex actions will be.

You know, it was just ordinary machine tool processing industrial software before, and we didn’t have it in our country.

All of them are required to use industrial software from Germany or Japan to drive the use of those machine tools.

And we can only complete some very simple processing work, but we can't play with it if it is a little more complicated.

Of course, this refers to the ordinary machining field. In the military field, we still have our own software.

Although it is not very efficient, it can be used as much as possible.

And the software they created now has been completely killed in the face of the strength shown by this machine tool.

To be honest, there were many scientific researchers in the institute watching the video of an industrial robot drilling holes in an iron ingot created by Starfire Technology.

To be honest, not many people believed it at the beginning because this picture was too fantastic to them.

Such a large piece of iron ingot, even if they use the machine tools they have now to process, they cannot produce such a hydraulic valve body.

And such a weird robot was actually drilled into the iron ingot directly. This is simply a fantasy!

You should know that this is not just as simple as adding a perspective system to the machine tool and navigating the knife head.

You should know that during the processing, your drill bit will drill and grind back and forth on the iron ingot, which will produce a huge impact force in the process.

In the video, the robot uses two robot arms similar to human hands to fix the iron ingot.
Chapter completed!