The next morning, I got up at less than 5 o'clock, packed up my things, and didn't have breakfast. The first batch of workers went to the machine with the starlight. Now, it was no longer the previous test. There was only one machine, but it was just completed and there was no optimization. In the past week, Yang Yuanzhao has made all the efforts to produce the all-in-one machine. The carpenters made various parts according to the requirements, and then with the help of the installation workers, they installed them into finished products. From spinning machines to looms, more than 100 units have been initially completed.

These more than 100 machines have been almost completely modified. Five large laboratories have been borrowed temporarily. All of these machines are placed in them. 200 people are in a group to conduct idle and on-machine experiments. The entire step is the same as before.

The first group of red tassels was. When he entered this laboratory, he could no longer move his eyes. The spinning machine and the loom machine could see at a glance that the functions of these machines were obviously different from what he had operated before. The metal cotton ingots looked wider and more beautiful, and they could tell at a glance that they were high-end goods.

As the only two technical experts in this group, she was the one who was on the machine at the forefront. Another expert Zhao Feng was with him. They had seen and communicated before. The strength of the two should be almost the same. The one who was responsible for teaching them was Zhuang Min. Zhuang Min first started to operate on the machine and operated it smoothly. With the roar of the spinning machine, the cotton was spun into yarn. The high-supported yarn was absolutely excellent.

Those who learn about spinning are all experienced, especially Hua Hongying and Zhao Feng. They watched the spinning machine run in shock. The speed was obviously much faster than the machines they used before. They didn't know that this speed was just an ordinary speed, which was similar to the speed of German second-hand mobile phones before. If they really accelerated all of them, they would be shocked.

"Okay, you two, come up and try it first!" Under Zhuang Min's name, Hua Hongying and Zhao Feng stepped forward first. This was the first time they had touched this machine, but their years of spinning experience allowed them to learn about it in their observation just now. The speed was much slower than Zhuang Min, but there were no many mistakes. Each step was done according to the rules.

Only by using a spinning machine can you feel the effectiveness of the spinning machine. The speed is at least twice as fast as the one she used before, and the wiring is very comfortable. The thread tip is just where you can connect it. The unique skill of Hongying in the yarn mill before was to quickly connect it with one hand. There seems to be no use of it here. Whether it is a thread tip or a cotton spindle, they are all waiting in the most comfortable place, and he can easily connect it with his hands.

Examples of one, two, three times. From easy to difficult, some female workers of better level almost all took action in front of them. When more than 100 textile machines were standing in front of them, the entire test work also reached a "gaochao". The room filled with 200 people, and there was no crowding in the slightest. Two people were operating on the machines they were good at. The same was true for the distribution of people, and the number of spinners and weavers could enter at one time.

From the scene, weaving workers are more likely to get into the state than spinning workers. Although the weaving speed has been improved, the improvement of the shuttle has made the overall speed of the weaving machine similar to before, but the width is much wider. To a certain extent, it represents an increase in efficiency. The spinning machine is purely an increase in speed. Even if it is used for a lot of automatic links, it is necessary to be quick-eyed and fast-handed. Some people who are not very adaptable will be wrong several times soon.

Zhuang Min inspected five rooms. Later, he gradually skillfully took Hongying and Zhao Feng and did the same thing. As senior textile workers, they had operated more than one machine. This strange machine, no matter how much, was also a spinning and a loom. They were also familiar with the spinning process several times. After Zhuang Min recognized it, he asked them to assist her and guide others' spinning.

Teach and learn at the same time, complement each other and the speed is very fast. When the bell for get out of class is ringing, everyone feels that they are still unsatisfied. If this time is extended a little longer.

Rules are rules. If you change them casually, can they be called rules? Besides, there are 12 groups waiting to be operated on the machine. If you extend it on the other side, you will have to reduce it.

Zhuang Min led the personnel out of the laboratory without saying a word. On the outside of the laboratory, she met another instructor, who led more than 200 people under her to the laboratory.

The 18-hour round-robin female workers began to contact the spinning and weaving machine of Baotou in a preliminary manner.

More than 2,000 female workers are worthy of being experienced. This machine is slightly different from what they used before and is faster. After a series of modifications, Baotou No. 2 has been modified. To a certain extent, all aspects are much more powerful than Baotou No. 1, and it is more referenced to the characteristics of oriental people, especially in ergonomics. After a little adaptation, these people began to understand the operating procedures of these things and started to produce them smoothly. Especially 50 technical elites, after initial attempts, they mastered the spinning machine and loom machine, and quickly reached 3 levels, and a few elites even reached 4 times.

Among the few people who have reached the four levels of the textile workers, among the few women who know how to write and read newspapers, they clearly see the difference in Baotou.

Baotou is almost thousands of miles away from Wuhan where she worked before. At such a long distance, she didn't even know that Baotou was the city before. However, when she really saw this city, those newly built houses and tall boilers not far away, it proved that Baotou is definitely not an understatement. The most important thing is that Baotou is actually investing in the textile industry. The weaving layout in Hubei where he is once the pride of the whole of China, with a spinning capacity of 70,000 spindles and a variety of looms, but since Zhang

After the Zhongtang was gone, the Hubei Weaving Layout became worse and worse. Even an excellent worker like her could not get all his salary. Thinking that his son was going to school, he still had his mother-in-law on it. He gritted his teeth and signed an intention to work in Baotou for a salary of 40 yuan. This is twice his salary in Hubei. After a few months in Taiyuan, he had nothing to do. If he had not been given a letter from his son, he would have worried that this would be a scam. Now, the facts have proved that this is not a scam. Even this factory is a factory with a larger scale than Hubei Weaving Layout.

The most important thing is those spinning machines. As an old textile worker, the performance of the machine is very clear. In a way, the performance of the machine represents the output value and output. When Hubei Textile Bureau was at the beginning of the Hubei Textile Bureau, the annual output of a single spindle was about one-seven or eighth of a pack, and the minimum speed of the spinning machine was twice. Later, I saw the speed of two, three, or even four times. The swinging red braid can be clearly estimated that when a skilled worker operates it and operates at full capacity, it will be at least one pack a year, and the proportion of six or seven times increases. This cotton spinning mill is definitely not simple.

It’s not simple but not simple. This cotton mill has huge investment, and the total investment will definitely not be small. Baotou’s courage in this regard seems to be much stronger than Wuhan, Shanghai, and even Tianjin.

I know that this company is not a casual and casual enterprise, and its courage and investment are higher than Hubei weaving layout. If you know that her work is continuous, she will think carefully and carefully, recall the gains she has gained over the past few days, and put Hongying into a report and then report it.

To be honest, when the report was reported, Liu Shu did not expect that a female worker would mention so many opinions in a few days of observation. He could not determine whether the opinion was correct. However, he could provide so many things, which shows that the red tassel was so powerful that he could not handle such a thing, so he turned it over.

Liu Shu turned his opinion to Yang Yuanzhao. Yang Yuanzhao was stunned for a moment. He never thought that such a female worker would appear in the factories of the Republic of China. In a sense, what China's factories and the Baotou Industrial Zone in the future needed was people like Ping Hongying, who had rich practical experience, knew how to think, and would give suggestions from actual experience.

Yang Yuanzhao read this thin report very seriously, and even he tried and tried every aspect. After a busy day, after unanimous determination by York and Yang Yuanzhao, he basically affirmed the value of this report. In this report, some problems they ignored and encountered in actual work and production have been systematically put forward. At this point, this report is already valuable.

The adjustment of the machine was carried out almost immediately. These were simple, not major modifications to the overall situation. They were just a part, just a few parts were replaced, and the design was completed, and then the German female workers were asked to make adjustments to the rules. The German female workers were very rigid, but Yang Yuanzhao was confident. When the results of the entire experiment were completely placed in front of the two German female workers, these German female workers stopped talking.

In this way, the new rules and regulations began to operate, and a lot of adjustments were made, entering the system one by one, especially those who were unfamiliar, who carried out surprise drills. With the help of Yang Yuanzhao's all-in-one machine, with the help of carpenters and a large number of installation workers, the installation of cotton ingots of estimated 50,000 is probably no problem at all. As long as the factory is determined, the installation will be completed within a week, and within a maximum of half a month, the entire textile factory can produce suitable products.
Chapter completed!