readx;

Lin Qiangsheng had a talk with President Qi Yuanjing. President Qi meant that there was no problem with the Iron and Steel Institute and its affiliated companies selling hot-dip galvanizing production lines to Lin Qiangsheng. In any case, President Qi had to report to the Ministry of Metallurgy, which was related to the major issue of material allocation production plan. The Iron and Steel Institute did not have that great power.

"Go to the Ministry of Metallurgy!" Lin Qiangsheng asked Dean Qi to get into the car waiting downstairs, then got into the co-pilot and said to Wang Yun.

Wang Yun looked at Lin Johnson curiously, and wanted to ask him why he was so busy, both from the Iron and Steel Institute and the Metallurgy Department. He really wanted to know what big things Lin Johnson was doing. She started the car and went out of the Iron and Steel Institute to drive towards the Metallurgy Department near Andingmen. Wang Yun was just 21 years old this year and was at the age of curiosity. While driving the car, she was still thinking about it.

Qi Yuanjing looked at the interior of the car and said with a smile: "This is the car produced by you Binqi? This is the first time I have been in your car and feels pretty good. I'm almost catching up with the Japanese car!"

Lin Johnson turned around and smiled and said, "It's still far from the Japanese's technology. Under the leadership of Director Li Gang, Binqi is digging deep into the potential of Jetta sedans. While digesting car technology, they are also self-raised to develop new power systems and chassis systems!"

Nowadays, domestic enterprises have very limited autonomy, and many enterprises have no choice but to decide how much they produce and sell their products. Most of Binqi's revenue is transferred to the country, and even the development of new models is not funds. In the past, as a small factory, it was relatively free to operate and manage. Since becoming a central enterprise, it felt that the enterprises were becoming less and less autonomy. This is also the reason why Lin Johnson was unwilling to stay in the head office.

Since Binqi received the car technology that Lin Johnson took back to China, it has digested the technology under the leadership of technicians assisted by Li Gang and other FAW. They have shown great enthusiasm for product standardization. You should know that when the state approved the establishment of a production enterprise, the whole country was aimed at the purpose of exporting foreign exchange. If the technology was not good, the quality was not good, the goal of exporting foreign exchange would not be achieved!

Erixon, whom Lin Johnson found, was also very cooperative in this matter, and he showed his experience in managing the Swedish Saab Automobile Company. Although the Swedes' work is not as rigorous as the Germans, they are extremely serious and rigid. The standards are set to produce whatever they want. They cannot violate them at all.

With such serious supervision from foreign managers, the Chinese leaders naturally could not be bad. Lu Qiang-sheng was glad that several leaders who were transferred by the state to Binqi were all studied in the Soviet Union in the 1950s and 1960s. These people were all good. They were all top people selected by the country in that environment at that time. These leading cadres who went to Binqi were not stupid!

"The sh car factory is still negotiating with the Germans, and I don't know when they will be able to produce cars. You Binqi is the only car manufacturer in China. You have to work hard!" President Qi said to Lin Johnson with some emotion and expectation.

Lin Johnson nodded silently. In such a large China, there is only one company that can produce cars in large quantities, which is indeed pitiful! As for the sh car factory, it is just a handicraft workshop with a production of thousands of vehicles per year, which is not competitive compared to large automobile production groups like Binqi. Now the only two restricts Binqi development are technology and national systems. Lin Johnson thinks these two are the most difficult, and it is not something that Qi Yuanjing can do with just one word!

Lin Qiangsheng laughed relaxedly as he thought about it. Thinking of the Chinese sedan market that is equivalent to a piece of paper these days, he felt that China's sedan industry was developing at this time. First, there are no joint venture competitors in China and no force to protect joint ventures specifically against independent brands. Second, there are no large-scale imports of cars from abroad in China, and China's sedan market is relatively closed.

Facing Qi Yuanjing's somewhat puzzled look, Lin Qiangsheng said: "Director Qi. If we grasp the automotive materials well, our cars will not be behind! This is a big problem, involving many authoritative research institutions like your Institute of Steel Research. Institutions like yours cannot be mobilized by our enterprises, but you also have a large number of experts and technicians! You are a very important force. The development of Bincheng Automobile Company cannot be controlled by the enterprise itself. The company should also participate in the development of the enterprise and the research institutions. After you have developed the results, you will give it to our manufacturers for production. If our company's products are sold well, then invest in your research institutions. This healthy and virtuous cycle can continuously improve the quality and performance of the sedan materials, so that the domestic sedan industry can drive on the right path!"

Qi Yuanjing thought for a moment and nodded slowly and said, "You are right. For example, our Institute of Steel Research has many research results. These technical achievements are the crystallizations of our researchers working hard to study, but most of them can only be lying in the filing cabinet! Without the participation of enterprises, our researchers have finally developed the results but do not know where to use them. Such technical research lacks an important part of corporate participation. The disadvantages of focusing on research and neglecting application are very big!"

President Qi continued: "Xiaolin, your proposal is very good today. I will tell you about Minister Tang Ke of the Ministry of Metallurgy. Let our General Institute of Steel and your Bincheng Automobile Company have a technical exchange to see what you need. The researchers in our institute are so targeted to conduct research!"

Lin Johnson nodded and smiled and said, "This is a good thing. I have to inform our leaders of Binqi. Don't make a joke if we can't come up with any issues at that time!"

The car arrived at the Ministry of Metallurgy. Lin Johnson also showed the introduction letter. After the car stopped, Lin Johnson said to Wang Yun: "I don't know how long this time. If you are hungry, go buy some food!" As he said that, Lin Johnson took out ten dollars from his pocket and stuffed it to Wang Yun.

"Oh, I don't want it!" Wang Yun had no time to call Lin Qiangsheng and watched him open the door and get out of the car. She bulged her face and watched Lin Qiangsheng hurried into the gate of the Metallurgy Department.

Wang Yun looked at Lin Johnson's back and muttered softly: "It's so strange that this person is so young and talks to some minister seriously!"

Lin Qiang-Cheng-Cheng did not take any trouble this time, and Qi Yuanjing led him directly to the office of the Minister of Metallurgy.

"Old Tang is Comrade Lin Qiangsheng from Bincheng. He wants to build a galvanized plate production line. I will lead him to find you!" Qi Yuanjing introduced Lin Qiangsheng to Minister Tang Ke.

"Oh? Want to build a galvanized plate production line?" Tang Ke was looking through the documents and hearing the old comrades from the Iron and Steel Institute come in and quickly stood up to greet him. After hearing Qi Yuanjing's words, he looked at Lin Johnson in surprise and asked.

Lin Johnson looked at Tang Ke. The minister was in his 60s. He had a smile on his face, even if he didn't smile on his face, he would give people a very friendly feeling. Lin Johnson smiled and said, "Minister Tang, I am from Bincheng Heike Company. Our company has business dealings with Bincheng Automobile Company. Our company plans to build a galvanized plate manufacturer to produce car body panels. This is my letter of introduction!"

After Tang Ke took it, he smiled in surprise after seeing the content above: "It seems that the leader attaches great importance to the development of the domestic car industry. He actually wrote you an introduction letter!"

Lin Qiangsheng carefully put away the letter of introduction and said, "Minister Tang, we urgently need galvanized plates for cars. I know Wuhan Iron and Steel is studying this project. Do you think we can also participate?"

Tang Ke said hesitantly: "The hot-dip galvanizing unit project is difficult to study and build for a long time. Is it time for our country to adjust its economy? I'm afraid it will be difficult to apply to the State Council!"

Qi Yuanjing immediately said: "Comrade Lin Johnson said that he could use US dollars to purchase hot-dip galvanized units and a complete production line, and a set of 8 million US dollars!" He turned to look at Lin Johnson and said: "And Comrade Lin has improved hot-dip galvanized unit technology!"

"8 million US dollars a production line? Comrade Lin, can you really afford this foreign exchange? And what other improvement technology?" Minister Tang asked Lin Johnson in surprise when he heard Qi Yuanjing's words.

Lin Johnson had already explained the origin of the US dollar to Qi Yuanjing. He had to explain it to Minister Tang again. Although Lin Johnson did not say where the foreign exchange came from, there was nothing to doubt about the introduction letter from the leader.

Qi Yuanjing explained to Minister Tang again: "Xiaolin and a treasure, Minister Tang will definitely be shocked after seeing it!"

What Qi Yuanjing is most concerned about is the photo of the five-axis linkage finishing equipment on Lin Johnson. He believes that Minister Tang Ke will definitely be as shocked as him when he sees it!

Although Qi Yuanjing is not a mechanical background, he has been involved in the metallurgical industry since the mid-1950s, and Qi Yuanjing has a lot of knowledge about machining. He saw the precision equipment on Lin Johnson's photo, and with the many Chinese people next to him operating, Qi Yuanjing could tell at a glance that the equipment on the photo must be in China!

Lin Johnson shook his head and sighed. He knew that Qi Yuanjing would definitely tell his superiors on his own initiative. So Lin Johnson took out a photo from his wallet and put it on Minister Tang's desk and said: "Minister Tang. Our company can not only use foreign exchange urgently needed by the country to purchase complete sets of hot-dip galvanized equipment, but also provide the Ministry of Metallurgy with improved hot-dip galvanizing production process, so that the domestic hot-dip galvanizing technology is close to the international level!"

"Old Tang, this young comrade said that he can provide the improved Senjimi method. This production method can improve our country's hot-dip galvanizing technology by a big step!" Qi Yuanjing said to Tangke happily.

Tang Ke looked at the photo handed over by Lin Qiang, and couldn't hear what Qi Yuanjing said. He just blinked and blinked at the equipment on the photo. Minister Tang thought he was dazzled.

"Is the operator of this processing equipment Chinese?" Tang Ke asked Lin Johnson confirmation.

Lin Johnson nodded and admitted: "Yes, they have just been in contact with this equipment for less than half a year, but they have been able to master this CNC equipment very well!"

This high-end technical equipment is equipped with a fool-style operating system, so that operators do not have to understand the underlying technology of the system to operate through the press of a few buttons on the interface.

Although this is extremely simple, it also sets countless obstacles for Lin Johnson's research! The development of technology abroad is a direction of increasingly refined and professional development, and professional matters are left to professionals.

A five-axis linkage finishing center is a huge integration of many industrial disciplines. It is obviously unrealistic for Lin Johnson to study these systems alone to find out that it is obviously unrealistic for him to create such high-end equipment. The precision instrument team he has gathered together is now just a CNC unit that can modify ordinary machine tools. Since this way, it will be meaningless if Lin Johnson hides it.

He overestimated his ability to group research, and overestimated the difficulty of manufacturing a five-axis linkage finishing center. Lin Qiangsheng clearly realized that this was not something he could play with alone!

Tang Ke said in surprise: "How could it be? When did you import such high-end and sophisticated equipment in China?"

"Cough!" Lin Qiangsheng coughed embarrassedly, and said to the puzzled Minister Tang and Qi Yuanjing: "I'm very embarrassed to say that, this set of equipment was actually stolen from Europe, so don't tell me!" (To be continued.)

...
Chapter completed!