Font
Large
Medium
Small
Night
PrevPage Index    Favorite NextPage

Chapter 800: The Sad Senior Brother (four in one, there are(2/3)

Moreover, the protruding part may not reach the threshing ground and will completely collapse. In this way, it will require reloading the vehicle, which will be a big trouble!

Filling crops into the car is called "panche" in Han Cheng. Just the word "pan" can tell that this is not a casual thing, but a must-have skill for a farmer.

Han Cheng is not unfamiliar with these things, because when he was a child, when he had a "wheat holiday" in the summer, he would go to the field to collect wheat and load the truck with the adults at home.

Many times, in order to pull back some more wheat in a car, when the wheat is placed on the car and stomped on the car, he will be asked to put the wheat on the car with a wooden fork on it layer by layer.

At that time, Han Cheng was scolded a lot because of this, but as he received more training, he was able to load the car slowly.

Today, Han Cheng decided to teach the skills he learned a lot of childhood training.

After saying such words to those who had to load the truck after waiting for a while, Han Cheng, who had a wooden fork, took the wooden fork and shoveled up a pile of grains, walked to the side of the donkey cart, and used a little force in his hand. The wooden fork that was originally flat turned around in the air for half a circle and hugged it on the donkey cart.

This way of buckle the loading of the truck is not only easy to take when taking the wooden fork, but will not remove the millet loaded on the truck, but also very dense, the millet is not loose and loaded a lot.

The first fork Han Cheng was locked in front of the donkey cart, in the gap of more than 30 centimeters between the wooden cart and the "Garbage Slot".

The ears of the valley face inward and the pole face outward, and are about half the length, protruding outside the car and exist in the air.

The ears of grain face inward, on the one hand, because if the ears of grain fall down, they will fall on the car and will not be wasted.

On the other hand, the heavy ears of grain can make the stem protrude as much of the body as possible, so that more grain can be installed.

After the wooden fork was fastened, Han Cheng took the wooden fork and shoveled several wooden fork millets in succession, and installed the gap between the four chariots and the "sheep horns" in front, back, left and right of the donkey cart, and then stopped until it was about level with the chariot.

Then the shoveled millet was installed in the middle of the car body.

The donkey cart is not high, just about twenty centimeters. Without installing a few wooden forks on it, the millet inside the cart is already level with the cart.

Seeing this, Han Cheng stopped filling the millet here, and shoveled the millet and started to scoop on one side of the donkey cart, from the front to the back, as at the beginning, the ears of the grain were buckled into the cart.

After being buckled, the valley rod is also about half of the length exceeds the body of the car.

This time, it was about twenty or thirty centimeters above.

After installing one side, install the other side.

After installing both sides, start installing the gap left in the middle.

When installing, it also starts from front to back, but the wooden fork millet in the front requires the half-earth of the grain facing upwards to lean against the 'sol horn'.

After installing the middle from front to back for a round, repeat the previous movement...

During the loading process, after loading the millet close to the car, people need to lead the donkey forward. After the distance between them and the millet pile is closer, they stop and continue loading the truck. This is not only fast, but also the loading people are not so tired.

After installing two layers in a row, Han Chengcai asked the people around him to load the car in groups with wooden forks.

One of the two people is on the left side of the donkey cart and the other is on the right side of the donkey cart. Then find a minor to stand in front, holding the reins on the donkey's head, so that it will not move around, and the loading trio will be the same.

When standing there watching Han Cheng load the car, everyone didn't find it difficult, so they used a wooden fork to shovel the millet and buckle it on it.

But when it is really time to load the car by yourself, you will find that all kinds of problems have emerged.

Either they installed too much here or there are fewer ones, and some wooden forks were buckled incorrectly, and the ears of grain were facing outwards...

Han Cheng acted as a technical guide, telling them how to repair and remedy, and also used a wooden fork to demonstrate.

This way, while teaching and loading the carts, after all the donkey carts were loaded equal to the "Garland Horn", Han Cheng called these people to continue watching him show. After surpassing the "Garland Horn", the method of loading them up was different from before...

"Don't install the two sides of this last layer. You must install the top layer from front to back. Install one wooden fork against one wooden fork. In this way, you can press the stubble, and the crops will not fall off easily when the car moves forward!"

While loading the car, Han Cheng opened his mouth to explain the key points to everyone.

After installing the last wooden fork, Han Cheng did not let someone lead the donkey cart away.

This is when the crops loaded on the car have far exceeded the bus and need to be "braked" with a rope, otherwise they will not go far, and the crops that have finally been loaded will be crushed.

Han Cheng picked up the "brake rope" that had been prepared long ago, the thickness of a child's arms, tied one end to the base of the shaft on the side, and the remaining rope spread out and threw it over the roof of the car full of crops.

Below the body of the donkey cart, there is a wooden bolt about five centimeters long, two centimeters thick and three centimeters wide, respectively, in front of the wheel and behind the wheel.

Han Cheng bent down and stirred the swung brake rope on the wooden bolt.

"You pull this head, and when I exert force later, you will also exert force!"

Han Cheng handed the end of the rope to the senior brother who was standing aside to learn how to load the truck with this new tool, and at the same time he spoke out.

After seeing that the eldest brother understood what he meant, he held the rope around the roof of the car with both hands and pulled it down hard.

The valley rod was loose and not solid enough. As Han Cheng exerted force, the rope immediately pressed the valley rod and sank a lot.

The eldest brother also pulled hard according to Han Cheng's instructions, so the extra ropes were pulled away by the eldest brother.

Han Cheng pulled the rope down four or five times again. Seeing that there was basically no extra rope, the millet was tightened tightly by the rope, and then stopped.

"Don't let go, I'll let you loosen up."

After Han Cheng threw the remaining brake rope from the roof of the car to the other side of the car again, he said to the senior brother.

After seeing the eldest brother nodding and understanding, he then bent down on the other side of the car and hung the rope on the wooden bolt, then pulled it tightly, and then made a sound to let the eldest brother let go and let the eldest brother come over.

After Han Cheng handed the long rope in his hand to the senior brother, he continued to pull the rope down and pull it hard as before.

As he exerted force, the donkey cart shook slightly from left to right.

The rest of the things are done in the same way. Just tie the last rope to prevent it from spreading and relaxing, and then the car will be completely braked.

Because when these millets are loaded, they are pressed one by one, so although there are only a few ropes on it, as long as the ropes are not opened, the millets on the entire car will not be scattered.

After Han Cheng made a demonstration, he let the people around him look like he was just now, brake in groups of two people, while he turned around and guided him.

Many things are like this. When others do it, they find it very simple and easy, but when it comes to DIY, it becomes more difficult.

For example, it seems to be extremely simple to brake with a rope.

Even though many people in the Qingque tribe are well-versed in the binding method under the influence of their great son of god, the process is not too smooth, and many people have made some mistakes to the point.

After a while, these twenty-three donkey carts that had been used to pull millet for the first time were completely loaded.

Everyone who loaded the car looked around and saw without too much comparison, and they could see how different the car they installed were from the car they installed by the Son of God.

But despite this, these people were still very happy because the donkey cart was more than two meters high!

The Son of God said before that a donkey cart could carry crops of five wheelbarrows. At that time, he was already surprised by the fact that he was already in a state of surprise.

Now it seems that this donkey cart is loaded more than five wheelbarrows! The least one cart is loaded more than six wheelbarrows!

It turns out that what the Son of God said before was humility!

The witch, and the rest of the people involved in harvesting the crops, are now looking at these twenty-three donkey carts loaded like hills, with their eyes shining.

In the morning, the millet that everyone harvested together was estimated to be enough for the transporters to transport them on a wheelbarrow for a whole afternoon, but they didn't dare to stop at all before they could finish the transport. Now, it was only one trip, and it was just a half!

Although I had known that these donkey carts could be installed, everyone did not expect that they could be installed like this!

This... this is really a miracle!

At this moment, looking at this scene, the witch suddenly had the impulse to tell the gods who never paid attention to him.

However, he also understood that this was an important moment for autumn harvest, so he had to hold it back.

"Go away!"

Han Cheng led the donkey cart in front that he personally loaded the cart, shouted, led the donkey and the deer pulling the cart, and then fell a head in the field and walked towards the main road first.

With the donkey cart, today he found the feeling of harvesting wheat and loading it in the field as a child. Therefore, although he was exhausted and sweating, he was still very excited.

The hometown that I can’t go back to, the childhood that I can’t go back to is always so unforgettable, making people laugh or have red eyes to recall and miss it…

"ha!"

There is a not too big slope between the land and the stone slab. There is no problem pulling an empty cart upwards, but now it is not easy to pull a truck full of crops.

When he was still twenty or thirty meters away from this slope, Han Cheng, who was standing on the side of the shaft of the car, shouted, and reached out to slap the donkey who was pulling the cart, so that the donkey could speed up.

Then each person, a donkey and a deer began to trot, carrying the rush, and rushed all the way up the dirt slope to the stone road, without any hits, which made Han Cheng very satisfied.

The people who were leading the donkey cart behind them also followed suit. When they approached the earth slope, they started to accelerate in advance. They also did not spend much effort to get on the earth slope and came to the stone road, heading to the threshing yard that had been cleared out all the way.

"One, two, three! One, two, three!"

Come to the threshing farm, lead the car to the place you were booked before, and untie the brake rope that tied the millet.

Someone wanted to climb onto a donkey cart and pick the crops on it down with a wooden fork, and Han Cheng stopped it.

Let a minor following the car stand in front of the car and hold the donkey and prevent it from leaving. Then, with the two adults, pull out the wooden fork inserted into the crop car and go to the side of the car.

Lift the wooden fork in your hand diagonally upwards and insert it on the crops in the car.

Then, shouting a simple trumpet, the three of them held the handle of the wooden fork and pushed the crops on the car down in a few seconds.

This is much faster than climbing onto a car and picking down one wooden fork and one wooden fork...

This year, the Qingque Tribe's autumn harvest, these 23 two-wheeled donkey carts have become the most eye-catching scenery.

When I first started to contact the loading, I felt it was quite complicated, but after installing it a few more times, I could gradually grasp it.

With Han Cheng taking these people to demonstrate while teaching step by step, it took about a day to take more than a day for these people who were responsible for loading and transporting crops to learn this skill.

Although most of them are not as good as Han Cheng, they can already be used...

On the threshing farm, the first millets harvested and transported were spread out and dried there and were already dried.

Someone who was assigned a striking mission led a deer and pulled a stone carp and began to spin around it in circles.
To be continued...
PrevPage Index    Favorite NextPage