Looking at the components in front of him, Yang Xiaotao understood that this was a simulation before the formal experiment.

Data obtained through simulation, whether correct or wrong, is equally valuable.

The structure of this shell is also constantly simulating possible situations during exploration.

Take all these situations into consideration to eliminate hidden dangers and obtain the maximum success rate.

After thinking about this, Yang Xiaotao began to calculate in his mind.

If the precision meets the requirements this time, then there is no need to say more and the task will be completed directly.

But if the requirements are not met, then continue to improve the precision? When will it end?

Manpower will eventually be exhausted.

Here, we need to have firm faith, and even more, we need to believe in science.

After all, what is hidden here is the magic of science. If you want to release it, you can't ignore science.

But where is the other way?

It is obviously not possible to directly pour a whole steel plate, so it can only be manufactured.

Yang Xiaotao held his head and drew aimlessly on the paper with the pencil in his hand. From time to time he raised his head and looked out the window. The sunlight was dazzling, causing him to subconsciously dodge aside.

"Why did it break and crack?"

His head was hidden away from the sun.

Then he looked at the scorching sun, and there was a dazzling light in front of him. If he avoided his eyes, there were still strange spots.

"The sun is the source of light. Wasn't it just a ball at the moment of explosion?"

Light travels in a straight line.

Straight.

It bursts out from a point or group and then shoots out in all directions.

That.

"etc."

Yang Xiaotao suddenly found a glimmer of inspiration. Although he didn't know if it was right, who would know if he didn't try it?

"The joint broke because the pressure inside was too great."

"Pressure, where does the pressure come from?"

"Why is there pressure?"

"By the way, it's the pressure generated by the explosion reaction."

Questions popped into my head one by one, and I quickly wrote them down on paper.

Pressure in physics refers to the vertical force that occurs on the contact surfaces of two objects.

Yang Xiaotao drew many lines on the vertical force.

So what are the factors that affect stress?

Afterwards, Yang Xiaotao solemnly wrote down a formula.

A very simple pressure formula from a previous life physics class.

F=PS

"Then, the pressure on the shell must be kept constant, and when the pressure gradually increases, the stress area can only be reduced."

"The question is, how to reduce the stress-bearing area?"

Yang Xiaotao tilted his head, thinking about the increasing pressure inside the container.

What structure should be used to keep the pressure area of ​​the interface to a minimum?

Moreover, pressure comes from everywhere, and the effect of force is chaotic. Why not use internal pressure to make the joint tighter?

The two directions made Yang Xiaotao fall into deep thought.

Looking at the drawings beside him, Yang Xiaotao suddenly froze on the connection. It was simply processing two steel sheets into gear shapes, and then meshing them together to fix them.

Including the improved accuracy now, it means improving the accuracy of the two gears and reducing the gap.

Yang Xiaotao looked at the requirements for processing the end of the steel sheet on the design drawing. Suddenly Yang Xiaotao made a strong stroke at the interface and pulled up the contact surface. It looked like an extra semicircle on the contact surface. No, it should be a pipe cone.

The protruding piece is hidden inside, so that no matter where the internal pressure comes from, only the line in frontal contact bears the strongest pressure.

Moreover, in addition to this line, when pressure from other directions acts on the cone, it will force the connection to become tighter.

Just do it if you think of it.

Yang Xiaotao found a new piece of paper and modified the original workpiece drawing.

Half an hour later, Yang Xiaotao looked at the revised drawings and put down the pencil in his hand.

He felt that this method was worth a try.

After getting up, Yang Xiaotao went to Zhang Laodao's office. Seeing that there was no one in the room, Yang Xiaotao went to the workshop.

Zhang Laodao, who was walking around, originally wanted to see if Yang Xiaotao had finished it and then hand in the task tomorrow.

I'm trying to see if it works this time, but I don't want to miss Yang Xiaotao's shadow.

After asking Shen Rong, he heard that he had gone back to study with the drawings, but he was not reassured. He was a ninth-level engineer, not to mention level 9 here, even level 8 was at the bottom. There were a group of senior engineers, and he was a level 9 engineer. What can be seen?

Just as Zhang Dedao was about to go back, he suddenly saw Yang Xiaotao running towards this side.

"You kid, if you don't work, what are you doing?"

"I'm going to do an experiment tomorrow. If you don't want to go, let me know in advance."

Zhang Dedao came up and counted, but Yang Xiaotao ignored him and took out the drawings he drew.

"Team Leader Zhang, I modified this based on this drawing."

"Drawings? Why are you doing this? Those jobs are not enough for you."

As he spoke, Zhang Laodao picked up the drawing, then took the original drawing and compared it carefully.

At first I just looked at it, but after seeing the renderings, especially when Yang Xiaotao put the joints together, it became more intuitive.

"You did it?"

Zhang Laodao was a little surprised, because he also felt that Yang Xiaotao's design seemed more reasonable.

"Well, this is just what I thought. I don't know if it will work yet."

"Leave this here and follow me tomorrow."

"good!"

With Zhang Laodao coming forward, he is better than a newcomer like him.

Moreover, I will meet my parents tomorrow.

Although it is a bit inappropriate, it is indeed a meeting with the parents.

Sijiucheng, steel rolling mill.

Within ten workshops.

Yi Zhonghai is also making improvements to the drawings.

As an eighth-level fitter, he naturally understands drawings.

What's more, the drawings made by the technical department are simple, which is convenient for him to modify.

On the basis of the original pot cover, the edge position needs to be extended in a circle. As for the thickness, because the length needs to be increased, the thickness can be appropriately reduced. Anyway, it only needs to cover the rubber ring. If it is too thick, it will look unsightly.

In addition, the place where the rubber ring is installed on the pot body needs to be changed to a semi-buried type.

In the workshop, Yi Zhonghai kept writing and drawing. Guo Dabozi and others on the side watched nervously. They did not dare to say anything and allowed Yi Zhonghai to do whatever he wanted.

Qin Huairu leaned on Guo Dapi and looked at Yi Zhonghai, writing quickly.

I am more determined mentally. I must let Banggeng study hard and go to school. Even if he cannot reach the height of Yang Xiaotao in the future, he must be like a capable person.

This chapter is not finished yet, please click on the next page to continue reading the exciting content! When the time comes, you can leave this work to Bangge and enjoy the happiness at home.

Qin Huairu was thinking about it, but she didn't notice anything strange about Guo Dabo next to her.

At this time, Qin Huairu didn't wear much, and her proud figure was definitely on display. Moreover, the scent of soap on her body was fresh, which made Guo Da Paizi involuntarily take a second look at the white snow under his neck and the conspicuous big lantern.

This little widow is delicious.

Guo Dayai stared at Qin Huairu for a while. Qin Huairu on the side finally felt something. However, his body did not dodge. Instead, he moved his shoulders without any trace, making it easier for Guo Dayi to see.

Ahem

Guo Dayao suddenly felt uncomfortable in his throat, "Comrade Qin Huairu, go get some water."

Qin Huairu was stunned for a moment, then responded, "Okay, director."

After saying that, he twisted his butt and walked out.
To be continued...