Whether in front of the exhibition area of ​​Taishan Alloy Tool Group or in front of the exhibition area of ​​Maqi Alloy Tool Group, a large number of people gathered, and more and more people were gathered.

Not long after, there was a lot of people and the water was out of reach.

The biggest focus of this alloy tool exhibition should be in these two places, a domestic alloy tool company and a foreign company. The two are openly competing, and they are full of hot spots.

In everyone's eyes, under a large number of cameras, two machine tools from Taishan Alloy Tool Group are working.

The parts processed are consistent. For example, the CNC lathe is processed with a high-temperature alloy rod. Turning it into an exquisite part has a large processing allowance, which is a great test for tool wear.

Time passes by one minute.

It's very lively here.

"This is the first part!"

"The eleventh part is already there."

"Oh my God, don't you need to change the tool?"

"I don't look like I'm going to change the tool. I didn't see it. The surface of the processed parts is very bright, which means the blade is still very sharp."

“…”

Many people were excited to see that the parts were processed and the tools were not replaced, especially those anchors, who were always broadcasting live.

"Dear brothers, I can't believe that this is the eleventh part processed. Taishan Alloy Tool Group still has no intention of replacing the tool..."

This is a big internet celebrity anchor who is holding a mobile phone stand and broadcasting live on his mobile phone.

He walked to the front of the CNC lathe, sought the consent of the staff of Taishan Alloy Tool Group, picked up the newly processed parts and faced the camera.

"See, this is the eleventh part just processed. The surface is very bright, completely like a mirror, and the processing quality is first-class."

There are many anchors like him, and the whole scene has become more and more exciting.

The front of the exhibition area of ​​the Macchi Alloy Tools Group is different, and there have been booing sounds.

This is the second time they stopped to change the blade.

After the blade I replaced last time, I had obviously failed to process a total of five parts. There were traces of diggers on the surface of the parts, which was an obvious processing defect.

"Why do you need to change the blade again?"

"Do you know that Taishan Alloy Tool Group has processed eleven parts in one go, but has not replaced the blades."

"The twelfth part has been processed now, and the thirteenth part has been installed on the machine tool to start processing. I just came over there."

"Oh my God, the tools of Taishan Alloy Knife Group are so powerful!"

“……”

Hearing such words, Zhu Xiangsheng felt embarrassed, and at the same time he felt a little unbelievable, so he was ready to go over and take a look.

After finally squeezing over, he arrived in front of the two machine tools and took a look at the processed parts, and his heart sank slightly.

The experts look at the tricks, while the outsiders watch the fun.

Zhu Xiangsheng should be considered half an expert. When he saw that the processed parts were placed neatly and each part was beautiful, he knew something was wrong.

"Mr. Zhu, I'm here in person."

Seeing Zhu Xiangsheng appearing in his exhibition area, Han Guang of course had to come over and run him by the way.

Zhu Xiangsheng was haha, "Come and have a look, Mr. Han, how many times have you changed the blade?"

Han Guangdao, "Do you change the blade? What kind of blades are you changing? We haven't changed the blades."

What!

How is this possible?

Zhu Xiangsheng said, "Mr. Han, you're kidding. We've all changed the blades for the second time, but we've already processed ten parts."

Han Guang smiled and said, "We have finished processing the twelfth part, and the thirteenth part is being processed on the lathe."

Zhu Xiangsheng looked disbelief.

There was a big internet celebrity anchor next to him holding a mobile phone holder and facing Han Guang and Zhu Xiangsheng, saying loudly, "Taishan Alloy Knife Group has not changed its blades. We have so many pairs of eyes to look at it, which is not fake."

"Hey, in that video, they are betting that whoever loses will launch the domestic tool market."

"The younger one is Mr. Han from Taishan Alloy Knife Group, and the older one is the general manager of Yanguo District of Maqi Alloy Knife Group."

It turned out to be the two of them!

A large number of cameras and many mobile phones that broadcast live, aimed at the two of them.

Zhu Xiangsheng suddenly felt a little panicked.

Han Guangze looked confident and confident.

"The thirteenth part is completed and the fourteenth part begins to be installed."

I don’t know who shouted loudly, and everyone looked over. The door of the CNC lathe opened. The operator took off the parts processed on the machine tool and clamped a blank rod on it.

There is still no intention of changing the tool. After the blank bar is loaded, the start button is pressed and processing is started again.

"The fourteenth part has begun processing!"

"It's incredible that I've never replaced the blade. I don't know where the limit is. How many parts can a piece of alloy blade be processed."

When Zhu Xiangsheng heard these words and saw that the CNC lathe started processing parts again, he was even more panicked.

Han Guang looked at Zhu Xiangsheng with satisfaction and reminded him in particular, "Mr. Zhu, I am willing to accept the loss of the bet. I can't bet at that time."

Zhu Xiangsheng's face turned a little pale, his mouth trembled for a moment, and he couldn't stay for a moment, so he returned to their own exhibition area in a dirt.

Processing continues.

It didn't even stop at noon.

The two parties agreed that each machine tool would process 50 parts. In 10 pm, the CNC lathe of Taishan Alloy Tool Group was the first to process the fiftieth parts.

The lathe stopped, and Han Guang personally took off the 50th piece of the processed part from the lathe.

Holding this part in his hand, he said loudly and happily, "Everyone, the 50th part has been processed. First of all, its appearance is still very beautiful and as bright as a mirror."

After saying that, he personally picked up the measuring gauge to measure the size of the part, and then announced loudly, "All sizes are qualified!"

As soon as the voice fell, there was warm applause from the scene.

"I'm so proud, I didn't expect that our domestic knives are so powerful."

"If I hadn't seen it with my own eyes, I really couldn't believe that a piece of alloy cutter could actually process 50 parts made of high-temperature alloy in one go."

"Looking at this point, this blade has not worn out yet, so there is no problem to continue processing."

"Unfortunately, the bet between them is that each machine tool is to process 50 parts, and we cannot see where the limit of this black alloy blade is."

“……”

Everyone was discussing it hotly.

Han Guang put down the parts in his hand, took the tool removed from the lathe by the worker, placed it on the tool inspector, on the display screen, the alloy blade was magnified 100 times, and the blade edge was clearly visible.

Seeing the blade of this alloy blade, the scene became quiet and a sound of sucking cold air sounded!

......
Chapter completed!