Chapter 355
Liu Yong was stunned for a long time.
After a long time, I gradually came to my senses and thought to myself that there was no gray-black metal in the neighborhood of two or three hundred nautical miles, so it might be gone.
pity!
What a pity!
Liu Yong felt a strong sense of loss in his heart. Such an excellent metal was only found in that giant round hole, and only about two or three hundred tons.
If there are thousands or even tens of thousands of tons, that would be great.
These metals are obviously the product of alien civilizations. Could it be left over from alien civilizations when they visited the earth 50,000 years ago?
Could it be that the giant round hole was also abandoned by aliens and did not continue to dig it. What are they digging such a giant hole for...
Liu Yong thought for a long time alone until the voice of the Overlord sounded in his mind, which interrupted his thoughts.
"Master, I found a big trench nearby, which was bottomless. There were giant octopus inside this trench. Maybe there was this metal at the bottom of the trench."
Liu Yong said: "Maybe, it's a pity that you are too small to reach the bottom of this trench."
"Don't worry, master, I will work hard to grow up." The Overlord replied.
After chatting for a while, Liu Yong ended the call and felt a little regretful.
Perhaps, when the Overlord becomes bigger, you can go deeper into a deeper depth, such as searching at the bottom of the trench, you may find something.
Or, if the Overlord goes to the North Atlantic Ocean and then takes a closer look in the three giant caves, you may have new discoveries. Liu Yong comforted himself in his heart.
......
The turbine working blades and guide blades of the first machine have finally been manufactured.
This almost set a record, which took less than a week. If the normal manufacturing cycle was based on it, it would be more than twenty days or one month.
In the aircraft engine assembly workshop.
A turbofan X engine is being assembled, and all the turbine parts are replaced with newly manufactured turbine guide blades and turbine working blades.
There are many people around this engine, including chief designer Liang Wencheng, at least 20 or 30 people.
The assembly process is very smooth. The assembly of the turbofan X engine is not unfamiliar to technicians, especially those assembly workers are familiar with them.
The engine assembly is completed and after inspection, it is immediately sent to the test workshop for test run.
The test drive table was on standby long ago. As soon as this engine arrived, it immediately went to the test drive table for test drive.
According to the test run outline, the test run is carried out one by one. Judging from the various data, everything is normal.
Including the afterburner test run, all data were normal, and Liang Wencheng and others felt much more at ease.
After the test run is completed, the engine is taken off the test run and transported to the assembly workshop immediately.
The engine is even warm and the turbine part will be disassembled immediately.
The turbine receiver is opened, and the turbines at all levels are removed one by one and placed on the disassembly workbench.
Without even waiting for the turbine blades to be removed from the turbine disc, Liang Wencheng and others checked them one after another.
Gradually, almost everyone showed excitement.
The turbine blades after the test drive can be said to have been baptized by high temperatures, but each blade has no change in the slightest, including the color.
Each leaf is still gray-black, without any blueness or ablation, and it seems that it has not been tested at all.
"You see, the leaves are still like new, and there is no change at all."
"If I hadn't seen a test drive with my own eyes, I would have suspected that this was a new leaf."
"Our tricky problem solved, and the material made of blades can meet our requirements."
"Haha, I no longer have to try my best to import the so-called single-crystal high-temperature alloy. I just use this material. It is much better than the imported single-crystal high-temperature alloy."
“…”
Everyone was excited, happy, excited and happy. The atmosphere in the entire assembly workshop seemed different.
The turbine blades were removed and professional inspection was conducted without any problems.
Liang Wencheng waved his hand and prepared for a 300-hour long-term test run.
After arranging a 300-hour long trial, Liang Wencheng decided to go to Huahai City and prepare to talk to Liu Yong in person and buy some of this metal materials.
The two pieces of metal in the past were only dozens of kilograms, which only met the needs of one engine. Liang Wencheng planned to buy a few tons before talking about it, which would at least meet the needs of small-scale production of the turbofan X engine.
.........
Global Shipping Group.
Liu Yong thought to himself in his office, whether to move all the metal in the giant round hole in the North Pacific, such as in a seaside warehouse.
The seaside warehouse is now empty, and a total of four lithography machines have been transported away. Two 5-nanometer lithography machines have been transported to Factory No. 1 in Huahai City, and two 8-nanometer lithography machines have been transported to Factory No. 2 in Jinpeng County.
The dozens of security guards stationed in the warehouse have all been removed. The Overlord can go directly to the large warehouse, but be careful when passing through that passage, but there is no problem at night and will not be discovered.
Liu Yong opened the pet panel, opened the third-party vision, and saw the Overlord resting in its temporary cave.
Liu Yong looked at the hole a few more times, and he always felt a little strange in his heart. The hole was almost rectangular, and he always felt something was wrong.
"Big King, thank you for your hard work, and move part of the metal in the circular giant cave to our seaside warehouse."
The overlord said: "Master, I'll go right away."
The giant spear is temporarily placed at the entrance of the cave, and nothing can be stolen anyway. The king set out lightly and headed to the giant round hole.
It was only six or seventy nautical miles away, but it soon arrived at the entrance of the huge cave and swam into the cave.
After reaching the bottom of the hole, pick up a few larger pieces of metal and put it in your mouth.
Each piece is not small, the largest one may weigh 30 to 40 tons, and the smallest one should also have several tons, with a total of more than ten yuan, both large and small.
In other words, the Overlord held at least one hundred tons of gray-black metal in his mouth.
Holding these metals in their mouths, the Overlord swam out of this giant round hole and then swam towards Huahai City.
In the office.
Liu Yong had just closed the third party's vision and took a sip of coffee before his phone rang.
This is the phone number Liang Wencheng opened, "Mr. Liu, I will arrive in Huahai City tomorrow morning. When will it be convenient for you? I will come and visit you."
Liu Yong immediately knew that Liang Wencheng must have something to do with the gray-black metal. He thought for a while and said, "It will be three o'clock tomorrow afternoon, I will wait for you in the office."
…………
Today is New Year's Eve, and Beike wishes you all the New Year!
Chapter completed!